|
|
|
Product Information
|
| |
|
|
|
|
|
Application
|
Click Below for
Product
Data Sheet |
Description
|
Relevant
Case
Histories |
|
Super-Duty
Reinforced
Epoxy Coating
for Application
Under
Hydrocarbon Fuels |
GAS-PRUF 130 |
GAS-PRUF 130 is a unique blend of liquid polymers and proprietary curing
agents which are able to displace water or hydrocarbons such as gasoline or
diesel fuel from wetted surfaces in order to make a permanent bond.
The solvent-free, anti-corrosive formula is designed for use on pipelines
and in-service fuel storage tanks.
|
|
|
Solvent
Free Flooring System,
VAT & VCT Encapsulation,
Concrete,
Steel |
BIO-FLOR 182
(Click here for
Vinyl Chip
Color Chart)
(Click here for Vinyl
Chip Installation
Procedure) |
BIO-FLOR 182 is a versatile seamless flooring system able to produce attractive and
extremely long wearing surfaces for applications ranging from cafeterias to
chemical loading docks. BIO-FLOR 182 has virtually no odor during
application, which makes it ideal for schools, hospitals, and other
situations where odor is not tolerated.
|
27
35
37
39
42
48 |
|
Repair
Compound
for Impact &
Abrasion Resistance |
BIO-DECK 190 |
BIO-DECK 190 was custom formulated for TowveyorŽ track wear
surfaces. Outlasts conventional steel or iron reinforced cementitious wear
surfaces at least three to one. BIO-DECK 190 cures for service
within 4 hours.
|
28
33
33a |
|
| General Purpose
Reinforcing & Mortar Resin |
BIO-SEAL 192 |
BIO-SEAL 192 is a water tolerant, medium viscosity, general purpose
epoxy resin for sealing, GRP and epoxy mortar preparation. It ships
Non-Hazmat and has no odor during use.
|
|
|
Penetrating
& Reinforcing
Epoxy
Sealer |
BIO-SEAL 197 |
BIO-SEAL 197 is a lower viscosity version of BIO-SEAL 192 and is
intended for sealing and penetration of porous surfaces as well as for epoxy
mortar preparation.
|
|
|
High Gloss
100%
Solids
Epoxy
Heavy Duty
Protection |
BIO-GARD 251 |
BIO-GARD 251 is a hard, durable and extremely chemical resistant,
high gloss coating. It is an excellent coating for Wastewater and Pulp & Paper
applications where moisture tolerance during application and curing is
required. BIO-GARD 251 passed nuclear DBA testing for Service Level
1 use.
|
38
55 |
|
Solvent Free
& Lead Free
Safety Stripe
System |
BIO-GARD 254 |
BIO-GARD 254 is extremely safe and durable safety striping for
demanding locations. Lead and chromium-free, its 100% solids formulation is
designed for extreme service in material handling facilities, loading docks
and similar areas.
|
|
|
|
Super Duty Chemical Resistant Epoxy |
BIO-GARD 255 |
BIO-GARD 255 is similar to Bio-Gard 258 but is formulated with a
Novolac type epoxy resin. This Kevlar reinforced coating has
resistance to 98% sulfuric acid. Application is by brush or roller,
and it is completely water tolerant during application and curing.
|
|
|
Heavy-Duty
Moisture-Tolerant
Anticorrosive
Coating |
BIO-GARD 257 |
A completely water tolerant barrier coating, BIO-GARD 257 is designed
to provide excellent corrosion protection to steel and concrete under
adverse application conditions. It adheres extremely well to wet steel and
concrete, has no odor during application, and is ideal for poorly ventilated
areas such as bilges or void spaces.
|
50 |
|
Heavy-Duty
"Winterized"
Moisture-Tolerant
Anticorrosive
Coating |
BIO-GARD 257-UK |
BIO-GARD 257-UK is a
winterized version of BIO-GARD 257 that has been catalyzed to
allow applications under cold conditions at temperatures of 40F or above.
|
43
44 |
|
Heavy-Duty
Chemical
Resistant Epoxy |
BIO-GARD 258 |
KevlarŽ reinforced, brushable or rollable, BIO-GARD 258 is a
completely water tolerant coating with outstanding all around chemical
resistance. A two-coat system with BIO-GARD 251 as a glossy topcoat, it is
ideal for concrete coating in Wastewater facilities.
|
|
|
High Heat
Resistant
Anti-Corrosive General Purpose Coating |
BIO-GARD 300 |
BIO-GARD 300 is a high performance multi-use coating which may be
used as a DTM or in combination with other finishing coatings. High
temperature resistance is excellent and continuous service to 400°F
is possible. Impact testing after exposure to 400°F+
shows retention of excellent toughness and adhesion to steel.
|
|
|
|
High Performance, High Heat Resistant Lining |
BIO-CHEM 330 |
Designed for tank lining and down-hole application under aggressive
conditions, BIO-CHEM 330 is a 1/1 ratio epoxy with excellent
early resistance to a wide range of chemicals and down-hole service to 250şF.
|
|
|
Custom formulated Flotation Foam
for
Hydrocarbon Service
|
SINK-NOT 350
(Click Here
for
News Release) |
Especially formulated for hydrocarbon service, SINK-NOT 350 provides
a permanent solution for leaking pontoons on floating roof tanks and is an
efficient fire retardant and anticorrosive to retard the rate of pontoon
deterioration. It can also be used to insulate the voids of double
wall tanks and vessels for LNG storage and transportation.
|
|
 |
High-Strength Epoxy To
Toughen & Seal
Polished
Concrete
To Prevent Contamination |
SANI-SEAL 370
(Click Here for
Sani-Seal Brochure-- Printable PDF) |
A tough, high performance, solvent-free sealer, SANI-SEAL 370 is
especially designed for use on polished concrete. It penetrates the
surface to fill voids and encapsulate the entire surface making it resistant
to all common foodstuffs and cleaning agents.
|
|
|
Non-hazardous, Latex-based
Fire Protection Coating |
FIRE-NOT 451 |
FIRE-NOT 451, a proprietary blend of synthetic polymer latex and
non-hazardous active ingredients, responds to flame and high heat by
swelling into a thick, thermal insulating covering which seals the substrate
from damage. When activated by damaging heat, it swells to almost 50
times its original thickness becoming a fireproof blanket over sheetrock,
wood or almost any other construction surface.
|
|
|
Solvent-Free
Epoxy
Concrete
Repair Compound |
BIO-CRETE 451 |
BIO-CRETE 451 is a KevlarŽ reinforced, very quick cure, repair mortar
designed for military runway remediation. KevlarŽ fibers provide toughness
to minimize the possibility of FOD or foreign object damage after severe
impact.
|
|
|
Super-Duty
Protection
for Application
Above or Below
Water |
BIO-DUR 560 |
BIO-DUR 560 is a lower viscosity version of BIO-DUR 561 designed for
application either by heated, 1/1 ratio plural spray or by brush/spreader.
It is completely water tolerant and applies underwater with ease to concrete
or steel. BIO-DUR 560 is KevlarŽ reinforced, solvent-free and
extremely chemical resistant.
|
31
32
36
40
51
54 |
|
|
High Build
Super-Duty
Protection
for Application
Above or Below
Water |
BIO-DUR 561 |
The original and best, spreadable underwater repair epoxy, BIO-DUR 561
is applied by straight-edged spreader to steel or concrete above or below
water and the Nuclear version is approved for use in Service Level 1
applications above or below water.
BIO-DUR 561 has extremely wide chemical resistance and is ideal for
applications in Wastewater, Pulp and Paper, and Chemical industries with
severe chemical exposures. It is also an excellent coating for Splash Zone
and Risers on offshore equipment.
|
05
22
25
47
49
52
53 |
|
Super-Duty
Protection
Designed
Expressly
for Wet Service |
BIO-DUR 560SW
BIO-DUR 561SW |
These are modifications of the original BIO-DUR 560 and BIO-DUR 561.
The "SW" versions are particularly easy to apply - especially on
cathodically protected surfaces.
|
46 |
|
Quick-Cure
Super-Duty Protection
for Application Above or Below Water |
BIO-DUR 563 |
BIO-DUR 563 is an accelerated cure version of BIO-DUR 560 formulated
for use in projects such as pipe repair where quick cure before backfilling
is necessary. This accelerated formula is also useful in cold weather as a
Winter Version when standard products become thick and slow to cure.
|
|
|
"5-Minute" Repairs
Above or Below Water |
BIO-FIX 911 |
BIO-FIX 911 is a unique adhesive that can be applied above or below
water to stick or repair steel, PVC, GRP, aluminum etc. under adverse
conditions. Use it with fiberglass cloth or tape to make 5-minute repairs
to pipes, boat hulls etc. It ships Non-Hazmat
|
04 |
|
Custom Engineered Composite Wrapping Tape
for Positive Leak Control |
BIO-WRAP 999 |
BIO-WRAP 999 is a custom-engineered, highly adhesive, themoplastic
waterproof sealing membrane that provides positive leak control in
structures such as silos, dams, canals, ponds, and aquaria. It may be
installed and painted under water using other TFT products.
|
|
|
|
|
|
|
|
ĘClick Here to Print TFT Product
List |
Note: "Printer-Friendly" Version is PDF file and
Adobe Acrobat Reader is required to view it. You can download FREE
viewer by clicking button below: |
|
|
 |